DTP HDMI 230 Rx The Extron DTP HDMI 230 Rx is a digital twisted pair receiver that works with Extron DTP 230 transmitters for the transmission of HDMI, audio, and bidirectional RS-232 and IR signals over a single CATx cable. It provides an economical and effective means for extending HDMI with embedded multi-channel audio from HDMI-equipped devices. In addition, the DTP HDMI 230 accepts analog stereo audio signals and digitizes them for simultaneous transmission over the same twisted pair cable. It is capable of receiving 1080p/60 Deep Color, 1920x1200, and 2K signals up to 230 feet (70 meters). The compact enclosure sizes and remote power capability make the DTP HDMI 230 ideal for extending HDMI, audio, and bidirectional control in space-challenged environments. Video Maximum data rate 6.75 Gbps (2.25 Gbps per color) Maximum pixel clock 165 MHz Resolution range Up to 1920x1200 or 1080p @ 60 Hz; 8, 10, or 12 bit color depth Formats RGB and YCbCr digital video Standards DVI 1.0, HDMI, HDCP 1.1, CEA-861E Video input — transmitter Number/signal type 1 single link HDMI (or DVI-D*) Connectors 1 female HDMI type A Video output — receiver Number/signal type 1 single link HDMI (or DVI-D*) Connectors 1 female HDMI type A Audio Gain Unbalanced output: 0 dB; balanced output +6 dB Frequency response 20 Hz to 20 kHz, ±0.5 dB THD + Noise 0.03% @ 20 Hz to 20 kHz at maximum output S/N >90 dB, at maximum output (15 dBu), balanced (unweighted) Stereo channel separation >80 dB @ 1 kHz to 20 kHz Audio input Number/signal type 1 PC level stereo, unbalanced Connectors (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) Impedance >10k ohms, DC coupled Nominal level -10 dBV (316 mVrms) Maximum level +7 dBV (unbalanced) Audio output Number/signal type 1 stereo (2 channel), balanced/unbalanced Connectors (1) 3.5 mm captive screw connector, 5 pole Impedance 50 ohms unbalanced, 100 ohms balanced Gain error ±0.1 dB channel to channel Maximum level (600 ohm) >+11 dBu, balanced